- To enable SNMP logging, log into the ISIS Management user interface (MUI).
- Go to the Settings tab.
- Under the Monitoring section, click SNMP.
- In the SNMP Logging section, check the Enable SNMP Logging checkbox.
- Enter the IP address of the SNMP server in the SNMP Server Address field.
- Enter the port number of the SNMP server in the SNMP Server Port field.
- Click Save.
2.Configure the SNMP server to receive logs from the ISIS server.
- Configure the SNMP server to receive syslog messages from the ISIS server.
- The ISIS server sends syslog messages to the port configured in the SNMP Server Port field.
3.Monitor the SNMP logs for errors and warnings.
- The SNMP logs can be monitored using any syslog viewer or monitoring tool.
- Look for errors and warnings that may indicate potential issues with the ISIS server.
4.Take appropriate action to resolve any errors or warnings.
- If an error or warning is found in the SNMP logs, take appropriate action to resolve it.
- For example, if a disk drive is failing, you may need to replace it.
Here are some additional tips for using SNMP logs in Avid ISIS servers:
- Use a centralized SNMP server to collect logs from all ISIS servers in your environment.
- Configure SNMP logging to include a timestamp and device name so that you can easily identify the source of any errors or warnings.
- Regularly review the SNMP logs for any potential issues.
- Take appropriate action to resolve any issues as soon as possible.
By following these tips, you can use SNMP logs to help keep your Avid ISIS servers running smoothly.